Safety officer interview questions

Health and safety officer interview questions and answers

Before being hired as a safety officer one is subjected to an interview. This particular interview is meant to let the interviewer know how well one understands about health and safety. It is always paramount to be well prepared to answer these questions. The ideal way of doing this is going through the common safety interview questions. These questions might not be exactly the same as the one that will be asked during the interview. But they give one insight on what will be asked. Here are the primary safety officer interview questions.

Question 1. What is an emergency?

Answer I. An emergency is when a situation that was not expected happens. This means that the particular situation was not foreseen and therefore it has happened as a surprise.

Answer II. Emergencies are risky situations which put people at risk but happen when no one is not expecting. Such situations require to be handled as soon as possible so as to reduce or eliminate the risks.

Question 2. What is work permit system?

Answer I. This is a written document which provides permission to undertake a job by area in charge. This particular document can also be referred to as the written document issues by the area in charge to the performer giving authorization to undertake a particular job.

Question 3. What is work at height?

Answer I. Work at height is when workers work above the ground in a place where the height is considerable.

Answer II. This is when the workers are working in an elevated level where there is a risk of falling

Question 4. What is confined space?

Answer I. This is when one is working in a place where there is limited space. This means that the space available is not enough to move about as one wants.

Answer II. Confined space is when a worker or workers are working in a place which is enclosed and there is no freedom to move around especially while one needs to carry long items.

Question 5. What is excavation?

Answer I. This is marking a tunnel or a hole through digging the ground. Excavation can be done by either by a person or a machine depending on the requirements or availability of the machineries.

Question 6. What is scaffolding?

Answer I. This is when a temporary platform which is constructed to support workers while working in a construction site. This is especially while working on high heights where the workers are unable to work
from the ground.

Question 7. What is sandblasting?

Answer I. This is removing unwanted substances such as rust, scales, old prints or scales from the old surface using compressed air. The removal of these substances make the surface become as good as new and this plays an
important role in making work more efficient.

Question 8. What is LEL?

Answer I. This is the minimum concentration of gasses, vapor and dust in air below which propagation of flame does not occur on contact with a source of ignition.

Question 9. What is UEL?

Answer I. This is the optimum proportion of gasses, vapor and dust in air above which proposal the flame does not occur on contact with a source of ignition.

Question 10. What is manual handling?

Answer I. Manual handling is when workers do not use any kind of machineries to perform different duties. The workers use their hands to carry different things especially the things which are not too heavy.

Question 11. What is personal protective equipment?

Answer I. This is the equipment that is specifically meant to enhance the safety of individual workers. The equipment is used by individual workers with an objective of enhancing their safety before using the
equipment that is meant for collective safety.

Question 12. What is a JSA?

Answer I. This is the procedure of analyzing job for the
specific purpose of making sure that all the hazards and developing are
identified.

Question 13. What are the duties of a safety officer?

Answer I. A safety officer is responsible of checking whether all the HSE attributes are put in place. The officer needs to inspect the working places and ensure they are safe for the workers.

Answer II. The safety officer is supposed to advice
employers on the things they should do to ensure the safety of the workers is enhanced.

Answer III. The safety officer is also the person who is responsible of making sure that the workers
are able to enhance their own safety through being skilled and observing the various safety attributes.

Question 14. What are the duties of a supervisor?

Answer I. A supervisor is the person who oversees the duties of the junior officers to ensure they are working diligently.

Answer II. A supervisor is responsible of ensuring that all the things that are required for workers to work properly are available. These include providing proper tools which do not Put the workers at risk.

Question 15. What are the precautions for sandblasting?

Answer I. It is paramount to wear protective clothes while sandblasting to ensure one does not get hurt.

Answer II. One should use the right tools which do not bring about any risk for the substances removed during sandblasting can be harmful.

Question 16. What are hazards and injuries in manual handling?

Answer I. While doing manual handling one can get injured if one is lifting a heavy object.

Answer II. If one is dealing with sharp objects there is a possibility of being cut or pierced by the sharp objects.

Question 17. What precautions are needed to avoid accidents in manhandling?

Answer I. The most important safety measure while doing manual handling is to follow instructions on how to handle the different things.

Answer II. To avoid accidents while manual handling it is advisable to always wear the necessary protective clothes.

Answer III. While doing manual handling it is also advisable not to be in unnecessary hurry because this is a major cause of accidents.

Question 18. What are the causes of accidents in manual handling?

Answer I. The main cause of accidents in manual handling is failing to follow the stipulated instructions.

Answer II. Working in a hurry makes workers lose concentration and this exposes them to accidents which could have been avoided.

Question 19. What are the accidents in poor house keeping?

Answer I. One of the main accidents is tripping on things that might have left on the floor while they should have been kept somewhere else.

Answer II. Things getting damaged when they come into contact with water or other substances that can easily cause damages.

Answer III. Poor lighting usually causes people to trip on different things.

Question 20. How do you care and maintain hand tools?

Answer I. Ensure that the hand tools are properly cleaned after they have been used.

Answer II. Use the hand tools exactly as per as the instruction.

Answer III. Ensuring that the hand tools are stored exactly where they should be stored.

Question 21. What precautions are necessary in electrical work?

Answer I. When the electricity experiences a problem the power should be switched off at the main switch to avoid dangers.

Answer II. Always ensure that the person dealing with electrical issues is properly trained and has a license.

Answer III. Never let water near electricity because water is a good conductor of electricity and can cause damages.

Answer IV. Use high quality wires which are properly coated to avoid unnecessary accidents.

Question 22. What are the hazards in constructions?

Answer I. Falling off from a high height is one of the main hazards in constructions.

Answer II. An object falling on a worker is also a common hazard in construction.

Answer III. Being tripped by objects placed on the ground is also a common construction hazard.

Question 23. What are the general precautions in construction?

Answer I. It is important to wear the right protection clothes while working in a construction site.

Answer II. Use the tools as they are supposed to be especially the machineries.

Answer III. Do not leave tools and construction materials on
the ground unattended.

Question 24. What are the safety precautions of scaffold?

Answer I. Always ensure that the scaffold is strong enough and can support the necessary weight.

Answer II. Wear the right protective clothes especially the ones that are supposed to hold one in place while on the scaffold.

Question 25. What control measures are necessary in confined space?

Answer I. Ensure there is space for air to enter to avoid suffocation.

Answer II. Have a space for emergency exit in case of situations which might require leaving the space within the shortest time possible.

Question 26. What are the safety rules while using ladders?

Answer I. Ensure that the ladder is not slippery by ensuring there are no substances such as oil or water.

Answer II. Ensure the ladder is supported properly and it cannot slip.

Answer III. Make sure that the ladder is strong enough and can support the weight which will be used on it.

Question 27. Give a brief note about fork lift truck

Answer I. A fork lift truck needs to be operated by a qualified person who knows how to operate it properly. It should also be positioned in a place where it will not cause any damages and where it has ample space to operate freely. The truck should be removed from the work place when it is not needed anymore.

Question 28. What are the precautions of excavation?

Answer I. Ensure that there is enough room for the excavation to be done properly.

Answer II. Use supportive materials to ensure that thetunnel or hole does not collapse.

Question 29. What are advantages of JSA?

Answer I. The workers are assured that the working environment is safe.

Answer II. It becomes easier to check the various hazards and as a result the projects are better organized.

Question 30. What is tool box talk?

Answer I. This is the discussion regarding safe work procedures, following of safety rules, job related hazards and the job related safety aspects. This type of talk plays an important role in ensuring all the safety attributes are in place prior to starting any project.

Question 31.What are the different types of hazards?

Answer I. Some of the most common types of hazards include; mechanical hazards, chemical hazards, electrical hazards, fire hazards,electrical hazards, pollution hazards and radiation hazards.

Question 32. What are the different types of inspections?

Answer I. There are 5 different types of inspections and they are; continuous inspection, periodic inspection, intermittent inspection, statutory inspection and special inspection.

Question 33. What is safety management?

Answer I. This is the act of science of getting the safety objectives of the industrial company and therefore come up with the things that should be put in place to ensure that the necessary safety attributes are put in place.

Question 34. What is accident investigation?

Answer I. This is trying to get all the facts about the accident that has happened to know what were the causes and also how to avoid future accidents. This investigation needs to be done as soon as possible after the accident has happened so as to take the necessary precaution measures.

Question 35. How should an accident be reported?

Answer I. To effectively report an accident it is paramount to include a number of details including; date, time, activity, what happened, the people involved, what did not go right, causes, the suggested corrective actions, the safety officer reporting, the project manager and the signatures of all the people who got the report about the accident.

Question 36. What is the role of management in industrial safety?

Answer I. the management id responsible of writing a safety policy to be issued against the workers, materials and machines.

Answer II. Drafting a safety policy that is responsible of bringing management towards the various aspects in the workplace.

Answer III. Distributing the safety policy to all the people involved in the workplace.

Answer IV. Arranging for safety inspection which should be done once in every three months and arranging for safety audit which should be done once every year.

Question 37. What are human factors that usually cause accidents?

Answer I. There are a number of human factors that causes accidents and they include; carelessness, hurrying to increase production, laziness, lack of attention, lack of skills, being intoxicated and not using PPE. The safety officer might come up with an assortment of policies to enhance safety but it the responsibility of the workers to ensure that they avoid the various human factors to make sure that there are no accidents.

Safety officer interview tips : Every person who are all planned to attend interview which is belongs to HSE officer should refer previous year safety officer interview questions and answers.

Question 38. What is safety?

Answer I. Safety is ensuring that people are not exposed to situations that can readily result to accidents or any kind of harm. This means that in workplaces where safety is enhanced there measures that are put in place to
make sure that the people working there are not exposed to conditions that can lead to the people being hurt or harmed.

Question 39. What is accident?

Answer I. An accident is a situation which causes harm and happens unexpectedly. Accidents usually occur without the people affected knowing. Majority of accidents happens because of negligence where people fail to put in place the necessary safety measures. Accidents can also happen because of doing things in the wrong ways instead of doing them the way they are supposed to be done.

Question 40. What is hazard? 

Answer I. Hazard is something that has a probability of causing harm if not handled properly. This means that there is a risk of certain kind of harm if the necessary safety precautions are not implemented properly. The main aspect of hazard is that if everything is done properly the risk of harm is significantly reduced.

Question 41. What is risk? 

Answer I. Risk is the increased chances of something happening. In HSE risk involves probability of accidents and incidents happening in workplaces. High risk means that there are higher chances of an accident or incident happening. This is the primary reason why HSE advocates for reduction of workplaces risks to ensure chances of accidents and incident are reduced.

Question 42. What is safety policy?  

Answer I. A safety policy entails guidelines put in place to enhance safety.The policy outlines the things that need to be done and the things that need to be avoided so as to avoid accidents and incidents. The policy also stipulates measures that need to be put in place to provide protection against things that can cause harm.

Question 43. What is incident?  

Answer I. An incident is when something that is out of the normal happens. This does not necessarily has to cause harm but it deviates from the normal procedures. According to the HSE department, most incidents usually result to accidents and this can cause harm.

Question 44. What is safety audit? 

Answer I. A safety audit is taking time to ensure that the stipulate safety policies are implemented properly. The audit seeks to check whether the safety policies actually provide the necessary protection from accidents and incidents. Employers and business owners are encouraged to do safety audits regularly to make sure they are not using outdated safety policies.

Question 45. What is safety tag? 

Answer I. A safety tag is when a particular safety issue is given priority over the others. The safety tag identifies something that has higher chances of causing accidents especially in workplaces. The tag puts more emphasis on the particular thing so as to provide ample protection.

Question 46. What is safety  program? 

Answer I. A safety program entails a number of steps which are put in place to enhance safety. Such a program usually enlightens the people involved on the best ways of enhancing their safety and the safety of the environment. Most safety programs usually involve modern ways of enhancing safety and these ways are meant to provide more useful solutions.

How people are searching :

safety officer interview questions      workplace safety questions and answers

safety questions and answers             hse interview questions

safety interview questions                 occupational health and safety questions and answers

health and safety questions and answers test    safety related interview questions

safety question and answer in hindi       safety quiz questions and answers

hse interview questions and answers     health and safety quiz questions and answers

safety interview questions and answers     safety officer interview questions and answers

HSE manager interview questions    Health and safety engineer questions

HSE coordinator interview questions

Overview of HSE interviews questions and answers

Informative And Enlightening Details About HSE Interviews Questions And Answers

Understanding the HSE interview questions and answers is an important part of becoming a HSE supervisor. This is because the way one answers these questions determines whether one will get the job. A person who
answers most of the HSE interview questions correctly shows a good understanding of HSE. There are different ways of understanding these questions and answers. It is always advisable to search in advance prior to going before the HSE panel. Through researching one gets an idea of what to expect during the HSE exam and therefore increases chances of becoming a health and safety officer.

One of the most helpful way of understanding the HSE interview questions is going through the HSE past questions. This is helpful because even if the questions might change they usually have some common details. One might not get the exact questions from the past HSE questionnaire, but one at least understands about the kind of questions that are likely to be asked on the HSE quiz. One can get these past questions from different sources including on the internet where they are available in different forms including pdf. One can get as many questions as possible to increase chances of understanding how the interview is conducted. This is helpful for anyone who wants to become a HSE supervisor for it shows the HSE panel that one understands about the various requirements of a HSE manager.

To further increase chances of becoming a HSE advisor it is also important to clearly know who is a HSE officer. Upon getting this job one is expected to ensure all the safety attributes are maintained in the workplace. One gets to advise the company on the various measures to put in place so as to enhance H&S. By understanding what HSE officer means one is able to answer the HSE interview questions in a more competent way. This is because one gives answers based on the role that one will be performing after getting the job.

While attending a competency based interviews HSE it is also paramount to be focused. This is mainly because the HSE interview questions can be many and as a result can be confusing. One should take time to be properly prepared so as to attend the interview while fresh. By being composed one seems ready for the HSE job. The interviewing panel will be impressed by being fresh for it will show that the person looking for a HSE job is properly prepared. Arriving at the venue of the interview on time is important because it gives one time to relax before the interview. One can also carry the required documents to ensure everything is in order during the interview.

While answering the HSE interview questions it is advisable to give direct answers. The importance of this is that the interviewing panel might not have time to get into details. One should provide short but precise answers which give direct information. The time is usually limited and as a result it is paramount to use the time properly. By giving long answers one usually takes more time and this might reduce the time available. Giving direct answers also shows that one will be able to perform well as a HSE manager. Therefore, by following the outline guidelines one can understand the HSE interviews questions and answers and therefore increase chances of getting a health and safety job.